Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Rhawnhurst
If your Rhawnhurst chimney cap has rusted loose or your crown is cracked and shedding water, we can help. We install and repair chimney caps and crowns across Rhawnhurst, from the rowhouse blocks off Castor Avenue to the streets feeding into Cottman, and we treat these jobs the way attached housing demands: the flue next door matters as much as yours. Our technicians have up to 8 years of experience, and every estimate is free and written before any work is booked. Call (877) 812-1596. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Rhawnhurst Homeowners Call Chimney Sweep Torresdale for Chimney Cap & Crown
We work on the full chimney system, not just the visible parts. That matters on a Rhawnhurst row house, where a crown that’s lost its slope sends water down a flue that shares masonry with the house next door. Our technicians trace the whole stack instead of guessing at what’s active.
We’re a full-system chimney specialist, so the same company that sweeps and inspects also installs caps, rebuilds and coats crowns, and handles liner work if the inspection turns one up. Nothing gets passed to a separate masonry contractor who never saw the roof.
We use professional-grade components: Gelco, Famco, and Olympia Chimney caps and covers, not big-box hardware that rusts out in a few seasons. And we finish with a photo report so you can see what we saw, from the crown down to the damper.
Rhawnhurst customers call us back because the recommendation matches the evidence. If the crown just needs a coating and the cap needs reseating, that’s what the estimate says. If something can safely wait until the spring, we tell you that too.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Rhawnhurst
Cap Installation
A correctly sized cap keeps rain, birds, and debris out of the flue and includes a spark arrestor on solid-fuel stacks. On Rhawnhurst rowhouses, most stacks now vent a gas boiler or water heater, so we size and seat the cap for the appliance actually connected, not the fireplace that used to be there.

Cap Replacement
Rusted-through and missing caps are the most common thing we find on Rhawnhurst roofs. We pull the old one, check the flue tile and crown beneath it for water damage, and seat a new stainless or copper cap sized to the actual flue opening. If a neighbor’s abandoned flue shares your stack and sits open, we’ll flag it too.

Crown Repair
Original mortar crowns on 1940s to 1960s brick rows are at end-of-life across Rhawnhurst. When a crown cracks and loses its slope, water runs down the flue instead of shedding off the party wall. We rebuild the crown with a proper slope away from the flue and re-flash the base.

Crown Coating
When the crown is sound but the surface is spalling, a flexible crown coating buys years without a rebuild. We clean and prep the surface, then apply a coating that moves with the masonry through Northeast Philadelphia’s freeze-thaw cycles. It’s the cost-prevention option, and we’ll say plainly when it’s the right call.
We also install multi-flue and custom caps where the stack geometry calls for them – common on Rhawnhurst rows where one crown covers more than one flue opening.
Trusted Brands We Service in Rhawnhurst
We install Gelco, Famco, and Olympia Chimney cap and cover products, plus HeatShield for firebox and flue restoration when the inspection calls for it. These are professional-grade lines specified by certified chimney professionals nationwide, and they hold up to Rhawnhurst’s wet winters and humid summers far better than consumer hardware. We don’t claim to stock parts on a truck; we size the job on the roof, order the right component, and schedule the install. If you’d rather see the full range of what we handle, our chimney cap & crown team covers installation, replacement, and repair across the whole system.
Common Chimney Cap & Crown Problems We See in Rhawnhurst Homes
Most of what we find here isn’t heavy creosote. It’s water getting in through failing crowns and open flue tops – and on attached housing, that water doesn’t stay on one side of the wall.
- Cracked crowns that lost their slope. Original mortar crowns on mid-century brick rows crack at the flue and stop shedding water. Rain tracks down the flue, saturates the clay tile liner, and spalls the mortar joints on the party wall.
- Missing or rusted-out caps over boiler flues. These leave the stack open to rain, birds, and debris. On an attached row, the same opening feeds water into the neighbor’s masonry through the shared stack.
- Dead chimneys above sealed fireplaces. Many Rhawnhurst fireplaces were sealed and the boiler flue re-routed, leaving capped and disconnected flues that still collect moisture, efflorescence, and spalling tile. They look active until a technician traces them.
- Summer humidity damage. Damp flues rust dampers and push efflorescence through the brick. A sound cap and a properly sloped crown are what keep that from starting.
Pricing for Chimney Cap & Crown in Rhawnhurst, PA
A typical single-flue cap installation in Rhawnhurst runs $250 to $550, and a multi-flue or custom cap runs $450 to $1,100 depending on stack size and material. Crown repair typically runs $500 to $1,500, while a crown coating – the option when the crown is sound but the surface is spalling – runs $350 to $800. What moves the number is stack geometry, material choice, and whether the crown needs a rebuild or just a coating. Every job is priced per job from a written estimate, and the estimate is free. Rooftop work on height and steep pitch means a trained professional should handle it; this isn’t a homeowner task. Call (877) 812-1596 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterA Typical Cap and Crown Job on a Rhawnhurst Row House
On a typical mid-century Rhawnhurst row house, the original mortar crown has worn thin and cracked at the flue. The cap – often a cheap single-flue model over a stack that now vents a gas boiler – has rusted loose or gone missing entirely. Rain tracks down the flue, saturates the clay tile liner, and spalls the mortar joints on the party wall. Summer humidity leaves efflorescence and a rusted damper behind. A qualified local pro runs a Level 2 inspection, rebuilds or coats the crown with proper slope away from the flue, seats a correctly sized multi-flue or custom cap with a spark arrestor, and re-flashes the base – checking whether a neighboring abandoned flue shares the stack and needs capping too. That last check is what makes Rhawnhurst different: an open flue on one side of the wall is a water-entry path into the other.
We Also Serve Cities Near Rhawnhurst
The same cap and crown work reaches the streets around us. We serve Rhawnhurst and the surrounding communities of Mayfair, Holmesburg, Fox Chase, and the broader Northeast Philadelphia area. Same professional-grade components, same written estimate up front. If you’re just over the neighborhood line, call and we’ll confirm coverage before booking.
Serving Rhawnhurst, PA – Our Local Coverage Area
We serve Rhawnhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Rhawnhurst
Yes. Multi-flue caps are common on Rhawnhurst rowhouses where one crown covers more than one flue opening, including a boiler flue and a once-used fireplace flue on the same stack. We size the cap to the actual openings and check whether an abandoned flue shares the stack before finalizing the order. That’s a key part of the work here: an uncapped flue on one side of the party wall lets water into the neighbor’s masonry, so the whole stack gets accounted for, not just one flue. Call (877) 812-1596 for a free estimate.
A typical chimney cap installation in Rhawnhurst runs $250 to $550 for a single flue, and $450 to $1,100 for a multi-flue or custom cap. The number depends on stack size, material, and whether a spark arrestor is included. The written estimate sets the final price. Call (877) 812-1596 – estimates are free.
A Level 2 inspection is what we recommend before installing or replacing a cap in Rhawnhurst, because a camera scope reveals liner damage that a quick look from the ground won’t. Capping an already-cracked flue traps moisture inside and speeds up spalling. The inspection tells you whether to cap now, coat the crown first, or plan liner work. Call (877) 812-1596 for an exact quote.
Often yes. Cap replacement and a crown coating can usually be completed in a single visit when the crown is sound and the new component is on hand. A full crown rebuild, or a job that turns up a cracked flue tile, gets scheduled once the inspection is done. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing runs in the same range as Mayfair, Holmesburg, and Fox Chase, because the housing stock and the freeze-thaw conditions are the same. What raises a job in Rhawnhurst specifically is shared-stack geometry: capping a flue that shares masonry with a neighbor can require extra componentry, and that shows up in the written estimate. Call (877) 812-1596 for an exact quote – estimates are free.
Get a Free Chimney Cap & Crown Estimate in Rhawnhurst
If your Rhawnhurst chimney cap is missing, rusted, or your crown is cracked and shedding water into the block’s shared masonry, don’t let it compound. Call Chimney Sweep Torresdale at (877) 812-1596 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One company from sweep to rebuild, working with professional-grade components that stand up to Northeast Philadelphia’s weather.
Written by the team at Chimney Sweep Torresdale.