Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Torresdale Homeowners
The cap and crown are the two parts of your chimney that face every storm Torresdale throws at them, and they’re the two parts most homeowners never actually look at. When a cap goes missing or the crown cracks, water gets straight into the flue and freeze-thaw cycles along the Delaware River corridor open those cracks wider each winter. Our technicians have up to 8 years of experience specifically with cap and crown work, and we install professional-grade Gelco and Copperfield components rather than hardware-store covers that warp within two seasons. We treat cap and crown work as prevention, because a $250 crown repair today is far cheaper than the rebuild a slow leak eventually forces. Call (877) 812-1596 to book a free estimate.
What Our Chimney Cap & Crown Service Includes
Cap Installation
A chimney cap is the metal cover that sits on top of the flue, keeping rain, snow, and animals out while letting smoke escape. If your Torresdale home has an open flue with nothing above it, you’re one nesting squirrel or one heavy rainstorm away from water damage inside the chimney. We install Gelco and Olympia Chimney caps sized to your exact flue dimensions, sealed so they stay put through wind that funnels between Torresdale’s rowhouses.

Cap Replacement
Caps rust through, bend, or blow loose, and a damaged cap is worse than no cap because it can block draft and push smoke back into the room. If yours is rattling, crooked, or has visible rust holes, it’s time for replacement before the next storm season. We remove the old cap, check the flue tile beneath it for cracking, and set a new cap that fits properly instead of one bolted on with whatever was in the truck.

Crown Repair
The crown is the concrete or mortar slab at the very top of the chimney that sheds water away from the brick. Hairline cracks are normal as a crown ages, but once water gets in and freezes, those cracks widen and the whole crown starts to crumble. We repair crowns with proper bonding mortar and reshape the slope so water runs off instead of pooling, which is the single most effective thing you can do to protect the brick below.

Crown Coating
Crown coating is a flexible, waterproof membrane applied over a crown that’s still structurally sound but showing surface wear. It’s a smart option when the crown hasn’t failed yet but you want to stop freeze-thaw damage before it starts, especially on the older masonry common in Northeast Philadelphia neighborhoods. We prep the surface, apply the coating at the right thickness, and it flexes with the masonry instead of cracking like a rigid patch would.
Multi-Flue Cap
Homes with more than one flue, whether from a fireplace plus a furnace or a pair of fireplaces, need a single cap that covers the whole chimney top rather than individual caps cluttering the crown. A properly sized multi-flue cap protects every flue at once and looks far cleaner on the roofline. We measure the full chimney footprint and build or specify a cap that covers each opening with its own screened vent.
Custom Cap
Some chimneys have unusual dimensions, oversize flues, or a shape that stock caps simply don’t fit, and a poorly fitted cap rattles loose in the first good wind. A custom cap is fabricated to the exact measurements of your chimney top. We take precise measurements on site and have the cap made to match, which matters on the larger and older chimneys found throughout Torresdale and nearby Holmesburg.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We work with Gelco and Olympia Chimney cap and cover products because these are the professional-grade lines specified by chimney professionals rather than consumer retail. Gelco caps are built for durability in the kind of weather this region gets, and we know exactly where their mounting hardware tends to loosen over time so we can set them correctly the first time. Olympia Chimney covers give us reliable options for multi-flue and custom configurations where a stock cap won’t do.
For the crown itself, we use Copperfield chimney supplies, a wholesale-grade product line you won’t find on a shelf at a consumer store, because crown work lives or dies on the quality of the mortar and bonding materials. We also install DuraFlex components where a cap or crown job uncovers flue issues that need addressing at the same time. Whether you have a Gelco cap, an Olympia cover, or any other make, we can help.
Signs You Need Chimney Cap & Crown Right Now
- Water staining on the ceiling or chimney breast. Brown rings or damp patches near the fireplace usually trace back to a failed crown or a missing cap letting water straight down the flue. Catching it at the stain stage saves you from tearing into plaster later.
- Crumbling mortar or loose brick at the chimney top. If you can see grit on the roof or pieces of mortar on the ground below the chimney, the crown is likely failing. That crumbling lets water into the brickwork, and freeze-thaw cycles in this climate will accelerate the damage fast.
- A missing, bent, or rusted cap. A cap that’s blown off or rusted through leaves the flue wide open to rain, snow, and wildlife. It’s one of the cheapest fixes on a chimney and one of the most damaging things to ignore.
- Animals or nesting debris in the flue. Birds and squirrels treat an uncapped chimney as prime real estate. Beyond the mess, a nest blocks draft and creates a fire hazard, so a cap with proper screening is the real solution.
- Smoke backing into the room or a weak draft. A cap that’s too small, too low, or clogged with debris can restrict draft and push smoke back inside. The right cap restores proper airflow and keeps the smoke going up and out.
Our Chimney Cap & Crown Process – Step by Step
- 1
Roof-level inspection. We get up on the roof and look at the cap, the crown, the flue tiles, and the brickwork together, because a cap problem often reveals a crown problem underneath it. We photograph what we find so you can see it yourself rather than taking our word for it.
- 2
Assessment and recommendation. Based on what we find, we tell you which repairs are necessary now and which can safely wait, and we explain why. If the crown can be coated instead of rebuilt, we’ll say so, because restoring a sound crown is often smarter than tearing it out.
- 3
Written estimate before any work. You get a clear, itemized estimate covering materials and labor, set per job, before we touch anything. No surprise charges and no pressure to approve work you didn’t ask about.
- 4
Installation or repair. We install your new cap, replace a failed one, repair or coat the crown, or fit a custom or multi-flue cover, using Gelco, Olympia Chimney, and Copperfield materials chosen for the job. Everything is sealed and secured against wind and weather.
- 5
Final check and cleanup. We confirm the cap is seated correctly, the crown sheds water properly, and the whole assembly is sound, then clean up after ourselves. You get a clear picture of what was done and what to watch for going forward.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Torresdale?
Chimney cap and crown pricing in Torresdale depends mostly on whether we’re repairing what’s there or replacing it, and on the size and shape of your chimney.
- Cap installation: typically $175 – $400 depending on flue size and cap type.
- Cap replacement: typically $200 – $450, including removal of the old cap.
- Crown repair: typically $300 – $650 depending on how much of the crown has failed.
- Crown coating: typically $250 – $500 for a sound crown that needs sealing.
- Multi-flue or custom cap: typically $400 – $900 depending on dimensions and fabrication.
These are typical estimates, not fixed prices; the written estimate sets the final price for your job. Factors that shift the number include roof access and pitch, the height of the chimney, the condition of the flue tiles beneath the cap, and how much old material has to come off. You avoid overpaying by getting the repair scoped before anything is recommended, and by asking whether a coating will do the job a full rebuild would. Every estimate we give is free, itemized, and includes photos of what we found, so there’s no guessing.
Chimney Cap & Crown Near Torresdale – Our Service Area
We work on chimney caps and crowns throughout Torresdale and the surrounding communities, including Holmesburg, Mayfair, Tacony, Rhawnhurst, Bustleton, Somerton, Cornwells Heights, Eddington, and across into Langhorne and Langhorne Manor. If you’re in one of these neighborhoods and notice a missing cap or a crumbling crown, our chimney sweep Torresdale team can get out to take a look. Call to schedule and we’ll find a time that works.
Serving Torresdale, PA – Our Local Coverage Area
We serve Torresdale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Torresdale
The cap is the metal cover on top of the flue that keeps rain, snow, and animals out while letting smoke escape, and the crown is the concrete or mortar slab that seals the top of the chimney and sheds water away from the brick. Together they’re the first line of defense against water damage to the entire chimney system. A failed cap or crown lets water into the flue and masonry, which is where expensive repairs begin. We assess both on every visit so small problems don’t turn into rebuilds.
Most single-flue cap installations take under an hour, while crown repairs and custom or multi-flue caps can take a few hours depending on drying time and access. Crown coatings need time to cure, but the on-site work itself is usually done in a single afternoon. We give you a clear time window when we book the job. Call (877) 812-1596 for an exact quote, and estimates are free.
Typical costs range from about $175 for a basic cap installation up to around $900 for a custom or multi-flue cap, with crown repairs generally falling between $300 and $650. The final number depends on your chimney’s size, roof access, and how much existing material needs replacing. You’ll get a free, itemized written estimate before any work begins, and that estimate sets the price. Call (877) 812-1596 for an exact quote; estimates are free.
Yes, we install and service Gelco and Olympia Chimney cap and cover products, along with Copperfield crown materials and DuraFlex components where they’re needed. These are professional-grade lines, not consumer hardware, and we know how their mounting and sealing hold up over time. If your existing cap is a different brand, we can still help. Call (877) 812-1596 to set up an inspection.
Same-day service is often possible for cap and crown calls, and our dispatch hours are Sunday through Friday, 7am to 7pm. We answer 24/7, so a call outside dispatch hours is booked into the next opening. We’re closed Saturday. Call (877) 812-1596 to schedule.
Workmanship is backed by our satisfaction guarantee, and the materials we install come with the manufacturer’s coverage for their product lines. If something we installed isn’t right, we come back and make it right. We’ll explain exactly what’s covered on your written estimate. Call (877) 812-1596 with any questions before you book.
There isn’t much you need to do, but clearing access to the fireplace and the area around the chimney inside helps us inspect the whole system, not just the roof. Make sure we can get to the roof safely, and let us know about any roof work or skylights near the chimney. If you’ve noticed leaks or stains, point them out so we can check that area. Call (877) 812-1596 to book your free estimate.
Schedule Your Chimney Cap & Crown Service in Torresdale Today
A cap and crown in good shape protect everything below them, and fixing them now is far cheaper than repairing the water damage they prevent. We give free, itemized estimates with photos of what we find, and the estimate sets the price. Call (877) 812-1596. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Torresdale.